Skip to main content
Contact Us

XIP-3901-JPEG-XS

Multichannel JPEG XS Encode/Decode SMPTE ST 2110 Application for XIP-3911 and XIP-3901

The XIP-3901-JPEG-XS application supports multiple channels of HD and UHD encoding/decoding between SMPTE ST 2110-20 uncompressed video and SMPTE ST 2110-22 high-quality compressed video using the JPEG XS standard. The application provides a low-latency encoding side. An optional SMPTE ST 2110 stream alignment is available on the decoding side to match production studio equipment top-of-frame reference, if needed. Network connectivity is enabled with dual 25 GbE I/O for full SMPTE ST 2022-7 redundancy.

Based on open standards, this IP edge application is compliant with the SMPTE ST 2110 suite of standards and the JT-NM TR-1001 technical recommendation for easy integration in a broadcast...

FEATURES

  • Independent multi-channel JPEG XS UHD/HD video encoder/decoder
  • Ultra-low latency codec based on IntoPix’s ISO standardized JPEG XS transported over ST 2110-22
  • User selectable compression ratio from 6:1 to 36:1. (6:1 is nearly-lossless, 10:1 is visually lossless.)
  • Support HD (720p/1080i/1080p) and 4K UHD (2160p) video resolutions.
  • 3 operating modes available that optimizes number of encoding/decoding paths:
    • 2 HD/UHD encoders and 2 HD/UHD decoders
    • 8 HD encoders
    • 8 HD decoders

  • XIP-3911 and XIP-3901 applications supporting ST-2110 suite of standard and JT-NM TR-1001 on dual 25GigE IP media network interfaces:
    • SMPTE ST 2110-20/21 video outputs with associated SMPTE ST 2110-40 metadata streams
    • SMPTE ST 2110-30/31 Level A, B, C (up to 16 channels) audio stream
    • SMPTE ST 2022-7 Class A & D seamless protection switch­ing of IP streams
    • SMPTE ST 2059-1 & -2 precision time protocol with best master clock algorithm
    • Support unicast and multicast signals
    • JT-NM TR-1001-1 compliant including in-band or out-of-band control of NMOS IS-04/IS-05
    • Support of DHCP, LLDP and DNS-SD for easy IP configuration
    • Media interfaces supports AOC cable, Short and Long Reach fiber.
    • Supports FEC74 (CL74 Fire Code) and FEC108 (Reed Solomon IEEE) Forward Error Correction

  • 12G 2160p, 3G 1080p and HD 1080i/720p SDI output available on the decoder paths.
  • Complete integration with GV Orbit for configuration, control and monitoring.
  • HTML5 web-based configuration interface

  • Open configuration management & monitoring with the Rest API
  • Individual XIP-3911 and XIP-3901 applications licensed, purchased as needed
  • Rapid switching between XIP-3911 applications

SPECIFICATIONS

SDI Outputs


Physical: 8 used HD-BNC output connectors

SDI Standards:
SMPTE ST 292 (1.485, 1.485/1.001 Gb/s)

SMPTE ST 424 (2.970, 2.970/1.001 Gb/s)

SMPTE ST 2082-1:2015 (out 1 & 5)

Supported output formats:
HD: SMPTE ST 274: 1080i59.94, 1080i50

HD: SMPTE ST 296: 720p59.94, 720p50

3G: SMPTE ST 425 level A (mapping 1): 1080p59.94, 1080p50

12G: SMPTE ST 2082-10: 2160p59.94, 2160p50


Jitter:
HD/SD: <0.2 UI (alignment jitter)

3G: <0.3 UI (alignment jitter)

12G: <0.3 UI (alignment jitter)

Ethernet Port for Media


Physical: Two SFP28 sockets for active optical cable, short- and
long-reach fiber


Standard: IEEE 802.3-2008 25 GbE


Performance: Up to 25 Gb of streaming per direction

Ethernet Port for Control


Physical: One electrical RJ45 port

Standard: IEEE 802.3 1000 Mb/s

Video Processing Performance


Signal path: 10 bits minimum

Electrical


Power: 60W maximum

ORDERING INFORMATION

Application Software

XIP-3901-JPEG-XS

Multichannel JPEG XS Encode/Decode ST-2110 Application

Densité 3+ Frame

XIP-3911

Agile SDI/IP processing platform

XIP-3911-3+DRP-H

Double rear panel for Densité 3+ with HD-BNC

 

SFP+ Options

One or two SFP+ are needed to run this application

SFP-25G-SR

SFP28 25GBASE optical transceiver MMF

SFP-25G-LR

SFP28 25GBASE optical transceiver SMF

DOCUMENTS & DOWNLOADS

DATASHEETS

XIP-3901-JPEG-XS

This XIP-3901-JPEG-XS application from Grass Valley supports multiple channel of HD & UHD encoding/decoding between 2110-20 uncompressed video and 2110-22 high quality compressed video using the JPEG XS standard. The application provides low latency encoding side while an optional ST-2110 streams alignment is available on the decoding side to match production studio equipment top of frame reference requirement if needed. Network connectivity is enabled with dual 25 GbE I/O for full SMPTE ST 2022-7 redundancy.

Download
Technical Brief

Production in today’s world has become increasingly complex and expensive. While the cost of media rights has soared to record highs, the demand for new content has also increased. Producing this content has also
become more expensive. UHD and HDR formats have become a requirement for premiere content, while
concerns over ecological sustainability and health measures have made remote production more and more
commonplace. As a result, broadcasters have been driven to lower the cost of productions, and make more
content available at a lower price, often using a remote production crew.

Download

FAQS

JPEG XS Frequently Asked Questions

The top 5 frequently asked questions

Download

DOCUMENTATION LIBRARY

Further documents

Already know what you're looking for? Click the link below to access our full documentation library

Visit Library
Go back to top